नीरज चोपड़ा ने दोहा डायमंड लीग में लहराया तिरंगा, जीत के साथ की चैंपियनशिप की शानदार शुरुआत

नीरज चोपड़ा ने दोहा डायमंड लीग में जीत के साथ धमाकेदार शुरुआत की है।

from India TV Hindi: TopStory Feed https://ift.tt/ojvLnXq
via IFTTT

Comments

Post a Comment

Popular posts from this blog

3.NO/NC Contact and Boolean logic operation

Image
  NO/NC contact, Boolean logic In electrical circuits, a "NO" contact stands for "Normally Open" and an "NC" contact stands for "Normally Closed". A NO contact is a type of switch that is open by default and closes when it is activated, while an NC contact is a type of switch that is closed by default and opens when it is activated. For example, a doorbell switch may use a NO contact, where the circuit is open when the button is not pressed, and when the button is pressed, the circuit is closed, allowing current to flow and ring the doorbell. In contrast, a light switch may use an NC contact, where the circuit is closed when the switch is in the off position, and when the switch is turned on, the circuit is opened, turning off the light. NO and NC contacts are commonly used in industrial control systems and can be found in various types of switches, relays, and sensors. The choice between NO and NC contacts depends on the specific applica...
Read more

लंबे वीकेंड में घूमने के लिए बेस्ट हैं ये 5 जगहें, कम बजट में मिलेगा भरपूर मजा

Image
स्वतंत्रता दिवस के खास मौके पर लॉन्ग वीकेंड पड़ रहा है, ऐसे में आप 3-4 दिन की एक अच्छी ट्रिप प्लान कर सकते हैं। from India TV Hindi: TopStory Feed https://ift.tt/dSE6z9P via IFTTT
Read more

4.ON Delay Timer, OFF Delay Timer, Pulse Timer

Image
  ON Delay Timer An ON delay timer is a type of timer that is commonly used in industrial control and automation systems. It is designed to delayed turning on of a device or output after a triggering event has occurred. In an ON delay timer, when the trigger signal is received, the timer starts counting down a preset time delay. After the time delay has elapsed, the output of the timer is activated, and the device or output that it controls is turned on. For example, an ON delay timer might be used to delay the start of a conveyor belt after a sensor detects the presence of a product on the belt. This delay allows time for the product to be properly positioned before the belt starts moving. ON delay timers can be configured to operate in different modes, such as single shot, interval, or cyclic. They can also have different timing ranges and accuracy levels, depending on the specific application requirements. OFF Delay Timer An OFF delay timer is another type of timer com...
Read more